CCS/AWR1843BOOST: The BPM MIMO scheme for AWR1843BOOST EVM

Rata Zhang

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843

Tool/software: Code Composer Studio

Hi,

In the 18xx_dss and 18xx_mss demo,the TDM-MIMO scheme is used, I want to know whether the BMP scheme is supported for the AWR1843?

Thanks,

Regards,

Rata

over 6 years ago

0 Cesar over 6 years ago

TI__Guru*** 149044 points

Hi,

In SDK 3.2 the OOB demo does not support BPM.

There is no profile to support this configuration in

C:\ti\mmwave_sdk_03_02_00_04\packages\ti\demo\xwr18xx\mmw\profiles\

Thank you

Cesar

0 Rata Zhang over 6 years ago in reply to Cesar

Expert 2840 points

Hi Cesar,

Thanks for your reply, I want to know whether BPM will be supported for the AWR1843 in the future version?

Regards,

Rata

0 Cesar over 6 years ago in reply to Rata Zhang

TI__Guru*** 149044 points

Hi,

BPM will not be supported as part of the AWR1843 SDK OOB demo but it is supported even in SDK 3.2 as part of the DSP DPC object.

C:\ti\mmwave_sdk_03_02_00_04\packages\ti\datapath\dpc\objectdetection\objdetdsp\src

You would need to integrate it in the demo.

Thank you

Cesar

0 Rata Zhang over 6 years ago in reply to Cesar

Expert 2840 points

Hi Cesar,

Can I understand what you said as follows?Now the AWR1843 SDK OOB demo is implemented by using HWA DPC for radar data processing,if I integrate it by DSP method，the BPM mode will be supported?

Thanks，

Regards，

Rata

0 Cesar over 6 years ago

TI__Guru*** 149044 points

Yes

You are correct.

Please see the code and note that BPM is only supported for Azimuth Antenna

Thank you
Cesar

0 Rata Zhang over 6 years ago in reply to Cesar

Expert 2840 points

Thank you for your reply, I got it.

Sensors

Sensors forum

CCS/AWR1843BOOST: The BPM MIMO scheme for AWR1843BOOST EVM