This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1243: AWR1243: TX-RX antenna isolation

Part Number: AWR1243
Other Parts Discussed in Thread: TIDEP-01012,

Hello,

Here's the question I asked three weeks ago, is there any answer? Thank you!

My Customer designed a cascade radar using Preproduction AWR1243P. They tested that the TX-RX antenna isolation was 15~30dB, and they learned in the following link that the isolation should be greater than 25dB:
e2e.ti.com/.../652520
They designed three editions, and all the measures were very strict, they thought their boards were all right.They wanted to know why the TX-RX antenna isolation could not reach 25dB, Is it due to the chip?

  • Hello ,

    The TX-RX isolation on the CHIP is better than 25dB. The effective isolation with the antenna will depend on the antenna isolation. Could you provide details on what is the TX-RX antenna isolation on your board? Have you measured this separately?

    Regards,
    vivek

  • Hi Vivek,

    This problem results in poor imaging focusing effect and close moving target detection distance.Even with equipment, it is very difficult to measure transceiver isolation on a single board.Now my customer has made a two-piece cascade board, but there is still the problem of isolation.

    They want to know when the  AWR1243 cascade radar (TIDEP-01012) can be purchased. They want to use it for comparison.

    Thank you!

  • Hello,

    I do not have the exact date for the cascade EVM availability for the purchase. Please watch out on the TIDEP-01012 page for updates.. 

    regards,

    Vivek