Compiler/AWR1642BOOST: What's the maximum slope value that we can use in AWR1642 platform?

Hi,

Could you tell us the return value of 'rlSetProfileConfig' API function?

Multiplication of Frequency slope and ramp-end-time gives you end frequency of the selected ramp, which should not go beyond 81GHz for AWR1642 device.

Error value from above function will give us the reason of failure.

Regards,

Jitendr

Hi Jitendr,

The return value of 'rlSetProfileConfig'  show as below.

I think the ramp do not go beyond 81GHz ,we calculate show as below

FYI

Thanks

Frank

Hi Jitendr,

Any suggestion?

BTW.

Can I just turn off the HPF1 and HPF2?

Cause I want to detect the target which distance is less than 0.3m, is it possible in AWR1642 platform?

I think that I can's see any cloud-point less than 0.3m cause the IF is attenuated by the HPF1 and HPF2 ,right?

Or can you suggest the parameters setting for me?

Please help to clarify this question A.S.A.P

Thanks a lot

BR

Frank

Hi Jitendr,

I solved the Error 41.

But it still has Error 46 (Ramp end freq is not with[76GHz , 81GHz] in limits)

But I think the "ramp end freq" is between 76Ghz~81Ghz,my setting show as below.

76Ghz+(60*56/1000) = 79.36Ghz 

Can you help to clarify this problem A.S.A.P?

BR

Thanks

Frank