Hello ,
I am goning to purchase IWR6843ISK-ODS and I would like to make sure what can be detected by the module in advance.
I am fine if people counting and gesturing are supported without external MCU.
with best regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello ,
I am goning to purchase IWR6843ISK-ODS and I would like to make sure what can be detected by the module in advance.
I am fine if people counting and gesturing are supported without external MCU.
with best regards,
Hi Takatoshi,
Please look at the Industrial Toolbox on TI Resource Explorer for a complete list of labs on ODS.
Regards,
Justin
Hello Justin,
Thank you for your message. I have checked 'mmWave Sensors>Industrial Toolbox - 3.6.2>Labs>People Counting Demo>68xx - People Counting Demo' and I would like to know how long distance people can be detected.
Also, I am fine if you can show gesture recognition demonstration by 68xx.
with best regards,
Takatoshi
Hi Takatoshi,
The ODS antenna pattern is not suitable for long range people detection. Currently we have:
available on the ODS. For long range people detection you will need the ISK board. Then you can use the long range people detection lab for this purpose.
Regards,
Justin
Hello Justin,
I notice below informtion for ODS. Is people counting and gesture detection available up to 12m ?
Then, I would like to select ODS for my purpose.
Also, there is no information for ISK board regarding distance. I am fine if you can let me know how much distance people counting and gesture detection is available.
with best regards,
Takatoshi
Hi Takatoshi,
The overhead people counting demo is a 3D people counting demo that is compatible with the ODS antenna pattern. You can use this with the ODS board.
Regards,
Justin