AWR1843BOOST: LVDS buss rates for MRR

Wm Barnwell

Part Number: AWR1843BOOST

In the MRR function, what is the LVDS rates of data in parallel with the normal visualize outputs? Are there any conflicts in timing to have both feeds? Note that the desired LVDS data is the RAW A/D for all four receive channels and for both radar modes.

over 5 years ago

0 Raghunandan Kamath over 5 years ago

TI__Mastermind 22155 points

Hi ,

LVDS is not supported as part of the MRR codebase. LVDS is just a debug interface and hence not supported in this codebase.

However we do have our customers who have integrated the LVDS capture in the MRR codebase and using it in their field tests.

Thanks,

Raghu

0 Wm Barnwell over 5 years ago in reply to Raghunandan Kamath

Prodigy 170 points

When the DCA1000 is in use, my questions remain.

0 Raghunandan Kamath over 5 years ago in reply to Wm Barnwell

TI__Mastermind 22155 points

Yes. This is when the DCAN1000EVM is in use. I do not know of other way of collecting the LVDS data unless otherwise you have a custom FPGA to collect the LVDS data .

Thanks,

Raghu

Sensors

Sensors forum

AWR1843BOOST: LVDS buss rates for MRR