IWR1443BOOST: Request for Antenna Patterns

Kun Qian

Part Number: IWR1443BOOST

Hello,

I would like to compensate SNR of the detected points with antenna directivity so that it is independent of DoA of the points. However, I only find coarse figures of antenna patterns in the user guide. Could you please provide the pattern file?

Thank you.

over 5 years ago

0 Akash Gondalia over 5 years ago

TI__Guru 50240 points

Hi Kun,

Please see the Antenna Database on the TI Resource Explorer.

Let me know if you have more questions.

Cheers,

Akash

0 Kun Qian over 5 years ago in reply to Akash Gondalia

Prodigy 40 points

Hi Akash,

I check the directory but it only contains photos of antenna patterns. Are there any data files (e.g., .xls) that I can directly load and process?

Thank you.

0 Charles Oladimeji over 5 years ago in reply to Kun Qian

TI__Mastermind 33805 points

What do you mean load directly? What format are you looking for?

0 Kun Qian over 5 years ago in reply to Charles Oladimeji

Prodigy 40 points

I am looking for the data of the antenna radiation pattern rather than specific formats. The figure below in the Antenna Database folder plots the radiation pattern, but I cannot get accurate numbers from it. Any format that is readable (e.g., plain text, .xls) is OK.

Thank you.

0 user6096953 over 5 years ago in reply to Kun Qian

Expert 1310 points

Would support this request for having actual numbers rather than plots.

Best regards

0 zigang Yang over 5 years ago in reply to Kun Qian

TI__Mastermind 40445 points

Hi,

Every board will be slightly different. There is not much meaning to get an accurate reading. So, we can not provide the readable format. If you are interested, you can do a measurement with your board.

Best,

Zigang

Sensors

Sensors forum

IWR1443BOOST: Request for Antenna Patterns