• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 220 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/AWR1642BOOST: AWR1642

Adnan Munir
Prodigy 150 points
Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642,

Tool/software: WEBENCH® Design Tools

Hi adnan here Dear i wan to connect my AWR1642 with my raspberry 3b+ can i ? if yes then please guide me the procedure and driver of its UART ports like windows need Enumpack XDS110 drivers

  • 0
    TI__Guru 69960 points

    Hi Adnan,

    There is two to get the UART connected with Rpi- 

    1. over USB cable, connect USB to Rpi from AWR1642BOOST, where UART from AWR1642 will be enumerated as serial port which at Rpi you can read/write over.

    download XDS110 Linux driver from here.

    2. Connect UART line from AWR1642BOOST directly to Rpi on UART Rx/Tx hardware line, here you don't need XDS110 (as it is bypassed) and on Rpi you need to read these hardware lines. Refer to this thread discussing this part.

    Regards,

    Jitendra

  • 0
    Prodigy 150 points
    Thanks a lot



    Mailtrack Sender notified by
    Mailtrack 10/19/19, 12:13:22 AM