AWR1642BOOST: Radar raw data generation and storage

Julian Kapitel

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: DCA1000EVM, , AWR1843BOOST, AWR1642, AWR1843

We have a customer request where a customer wants to generate and store raw radar data.

The first-level support was able to tell me the first products (AWR1xxxBOOST), but in the end it is not quite clear to me what exactly we need.

My question; which EMV and which other hardware and software is needed to generate raw data and feed it to a measurement system such as brick from bplus?

I need a detailed list of the hardware and, if necessary, the software.

We need four SRR and one LRR (automotive)

Best regards.

over 5 years ago

0 Raghunandan Kamath over 5 years ago

TI__Mastermind 22155 points

Hi Julian,

For the SRR application(max 80m) you can look at the AWR1642BOOST and for the raw data collection you can use the DCA1000EVM .

For LRR application (max 150m) you can use the AWR1843BOOST .

If the above range requirement suits your application you can order these EVM .

Let us know if you need further details.

BR,

Raghu

0 Julian Kapitel over 5 years ago in reply to Raghunandan Kamath

Prodigy 50 points

Hey Raghu,

THX a lot.

can I use the DCA1000EVM for the AWR1843BOOST as well (to get the raw data out of the this module)?

Best regards. Julian.

0 Raghunandan Kamath over 5 years ago in reply to Julian Kapitel

TI__Mastermind 22155 points

Hi Julian,

Yes. You can use the DCA1000EVM with AWR1642/AWR1843 .

-Raghu

0 Julian Kapitel over 5 years ago in reply to Raghunandan Kamath

Prodigy 50 points

Thx.

Last Question from my side.

Is there any other Hardware needed for example cables, plugs, accessories, etc.?

0 Raghunandan Kamath over 5 years ago in reply to Julian Kapitel

TI__Mastermind 22155 points

Julian,

You would need the 5V/3.5A power supply. Rest of the cables and accessories are part of TI kit.

-Raghu

Sensors

Sensors forum

AWR1642BOOST: Radar raw data generation and storage