IWR6843ISK-ODS: I want to exchange the IWR6843ISK-ODS for the IWR6843ISK-ODS with different versions of chips.

Baekhyun Kim

Part Number: IWR6843ISK-ODS

I bought the IWR6843ISK-ODS like the photo below a week ago. But the chip version of this EVM was es 2.0.

I wanted to buy a the IWR6843ISK-ODS with chip version of es 1.0. So, I want to exchange this the IWR6843ISK-ODS with an the IWR6843ISK-ODS consisting of es 1.0 version of the chip.

over 5 years ago

0 Charles Oladimeji over 5 years ago

TI__Mastermind 33805 points

Hi Kim,

Is there any specific reason why you want ES1 instead of ES2? ES2 is the latest and greatest and ES1 is not longer available for purchase.

BR,

Charles O

0 Baekhyun Kim over 5 years ago in reply to Charles Oladimeji

Prodigy 50 points

Hi, Charles.

Es2 must use mmwave studio 2.1. But, in my configuration, DCA1000 is not connected to mmwave studio 2.1. On the other hand, DCA1000 is well connected to mmwave studio 2.0 using ES1 and mmwave studio 2.0. So, I want an exchange.

0 Former Member over 5 years ago in reply to Baekhyun Kim

Hello,

Can you clarify you are having difficulty using ES2.0 with DCA1000 for raw data capture using mmWave Studio 2.1?

ES2.0 does support ADC data capture using DCA1000 with mmWave Studio.

Amanda

0 Charles Oladimeji over 5 years ago in reply to Former Member

TI__Mastermind 33805 points

Hi,

I assume you were able to resolve this and will be closing the thread. Please reply if you still need assistance or make a new post referencing this one.

Regards,

Charles O

Sensors

Sensors forum

IWR6843ISK-ODS: I want to exchange the IWR6843ISK-ODS for the IWR6843ISK-ODS with different versions of chips.