IWR6843 : Can I program uniflash with the RS232_TX (N5) and RS232_RX (N4) pins on the IWR6843?

Jimun Jeong

Part Number: IWR6843
Other Parts Discussed in Thread: UNIFLASH,

Hi,
Can I program uniflash with the RS232_TX (N5) and RS232_RX (N4) pins on the IWR6843?
IWR6843 is SOP0 High, SOP1 Low, and SOP2 High.
The FT232RL was connected between the PC and the IWR6843.

Jayden.

over 5 years ago

0 Akash Gondalia over 5 years ago

TI__Guru 50240 points

Hi Jimun,

I've asked an expert to look into this, someone should have an answer for you next week.

Cheers,

Akash

0 Jimun Jeong over 5 years ago in reply to Akash Gondalia

Prodigy 180 points

In addition, RS232_TX (N5) is Yellow, RS232_RX (N4) is Purple.

SOP0, SOP2 is 3.3v
SOP1 is gnd.

Thanks, Akash

0 Jimun Jeong over 5 years ago in reply to Jimun Jeong

Prodigy 180 points

I solved this problem by looking at the documentation (IWR6843 Bootloader Flow).
Thanks.

Sensors

Sensors forum

IWR6843 : Can I program uniflash with the RS232_TX (N5) and RS232_RX (N4) pins on the IWR6843?