Hi Team,
I saw the layout part in the datasheet of TMP464. does the datasheet recommend D+ and D- route the different layer in multi-layer board? is it ok to route the D+/D- as the differential signal? thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I saw the layout part in the datasheet of TMP464. does the datasheet recommend D+ and D- route the different layer in multi-layer board? is it ok to route the D+/D- as the differential signal? thanks.
Hi,
Yes we recommend the D+ and D- pins to be routed between GND and V+ layers and to be routed as deferential pairs. Please See section "1.4 PCB Layout Considerations" of below app note.
http://www.ti.com/lit/an/sboa173/sboa173.pdf
Thanks,