AWR1243: MMWCAS-DSP-EVM with MMWCAS-RF-EVM, data miss

Qianqian

Genius 5010 points

Part Number: AWR1243
Other Parts Discussed in Thread: MMWCAS-DSP-EVM, MMWCAS-RF-EVM, TDA2

Hello TI Experts

Customer is using MMWCAS-DSP-EVM and MMWCAS-RF-EVM

Now they find that some data are not available and many frames are lost

Can you help give some advices? Thank you ~

over 5 years ago

0 Jitendra Gupta over 5 years ago

TI__Guru 69350 points

Hi,

Could you help us with the configuration of the device?

Did you use Studio inbuilt script to visualize the captured data? I would request you to try once with Studio based PostProc utility to plot the captured data.

Regards,

Jitendra

0 Qianqian over 5 years ago in reply to Jitendra Gupta

Genius 5010 points

OK, I'll try it and feedback to you later, thank you~

0 andy hsi over 4 years ago in reply to Jitendra Gupta

Prodigy 225 points

Hi Jitendra，

The phenomenon that I run demo is exactly the same as that of qianqian. We want to see the point cloud, but we cannot output it all the time. You can see that numDetObjects printed by matlab is always 0. What should I do to get point cloud output？

Best&Regards,，

Andy

0 Anand Gadiyar over 4 years ago in reply to andy hsi

TI__Genius 14725 points

Hi Qianqian and Andy,

Please provide more details on the software that you are using? Can you confirm that you are using mmWave Studio 2.1 and the corresponding TDA2 binary from Vision SDK 3.7.1?

What is the configured frame size and frame rate (or frame periodicity)?

Best Regards,

Anand

Sensors

Sensors forum

AWR1243: MMWCAS-DSP-EVM with MMWCAS-RF-EVM, data miss