This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: Radar Studio Exception

Part Number: DCA1000EVM

Dear TI engineer or online friends,We have a problem that needs your help.

We had no problem opening the studio a few times before, but this time we opened it and encountered the problem as shown below.

The issue shows Object reference not set to an instance of an object.

Please give us some suggestions.Thank you very much!

  • Hi,

    Try re-installing the mmwave studio, looks like some of the essential setting is missing here.

    Regards,

    Jitendra

  • Thank you very much for your reply, but we have reinstalled it, and the same problem has occurred.

    Regards,

     
    2019-11-06
    enderror

    发件人:"Jitendra Gupta" <bounce-1717369@mail.e2e.ti.com>
    发送时间:2019-11-06 19:54
    主题:Sensors forum: DCA1000EVM: Radar Studio Exception
    收件人:"mmwave_sensors_forum"<mmwave_sensors_forum@mail.e2e.ti.com>
    抄送:
     

     

    A Message from the TI E2E™ support forums
    Texas Instruments

     

    Jitendra Gupta replied to DCA1000EVM: Radar Studio Exception.

    Hi,

    Try re-installing the mmwave studio, looks like some of the essential setting is missing here.

    Regards,

    Jitendra

     

     

    You received this notification because you subscribed to the forum.  To unsubscribe from only this thread, go here.

    Flag this post as spam/abuse.

    refid:2595baa5-02e5-438f-913b-8188068b8b05

  • Hi,

    Could you try deleting 'C:\Users\<username>\AppData\Roaming\RSTD' directory content and then open Studio GUI?

    Regards,

    Jitendra

  • Thanks al lot.It's very helpful!
    Regards,
     
    2019-11-12
    enderror

    发件人:"Jitendra Gupta" <bounce-1717369@mail.e2e.ti.com>
    发送时间:2019-11-11 19:59
    主题:Sensors forum: DCA1000EVM: Radar Studio Exception
    收件人:"mmwave_sensors_forum"<mmwave_sensors_forum@mail.e2e.ti.com>
    抄送:
     

     

    A Message from the TI E2E™ support forums
    Texas Instruments

     

    Jitendra Gupta replied to DCA1000EVM: Radar Studio Exception.

    Hi,

    Could you try deleting 'C:\Users\<username>\AppData\Roaming\RSTD' directory content and then open Studio GUI?

    Regards,

    Jitendra

     

     

    You received this notification because you subscribed to the forum.  To unsubscribe from only this thread, go here.

    Flag this post as spam/abuse.

    refid:1d4bb1c0-9227-432f-b526-b2172ca082ab