IWR6843AOPEVM: Compatibility with the mmWaveICBoost rev. A

Timofey Savelyev

Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: MMWAVEICBOOST

Dear experts,

I am considering to purchase the IWR6843AOPEVM for our R&D projects. Will it work in combination with the carrier board mmWaveICBoost rev. A for raw data acquistion?

Looking at the available documentation http://www.ti.com/tool/IWR6843AOPEVM

over 5 years ago

0 Timofey Savelyev over 5 years ago

Intellectual 590 points

which refers to rev. B only.

Thanks,

Timofey

0 Former Member over 5 years ago in reply to Timofey Savelyev

Hello Timofey,

Yes - it should work. The primary difference between Rev A and B is an increase in the RC time constant for when NRST is asserted. This is to ensure that the correct SOP mode is latched. If you ensure that you toggle the NRST switch each time after changing SOP mode or powering up then there should be no issue with using Rev A.

Amanda

0 Timofey Savelyev over 5 years ago in reply to Former Member

Intellectual 590 points

Perfect, thanks Amanda!

Sensors

Sensors forum

IWR6843AOPEVM: Compatibility with the mmWaveICBoost rev. A