• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 31 subscribers
  • Views 651 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: How to use Data Separated Mode (multi mode) with AWR1642 (SOP mode 2) and mmWave radar studio

Chris Meng
Mastermind 37846 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: AWR1642

Hi,

My customer wants to use Data Separated Mode of DCA1000EVM with AWR1642 (SOP Mode 2) and mmWave radar studio. I checked the mmWave radar studio user guide and know that we need to reconfigure the Capture Setup file from RAW mode (default) to multi mode.

In mmwave sdk user guide, it mentioned that LVDS header should be enable in cfg file for multi mode. But I can't find the LVDS header enable setting in mmWave radar studio.

Would you pls kindly advise if it needs to enable LVDS header in mmWave radar studio for multi mode? If yes, how? If not, what else I need to follow to make the data separated mode work with AWR1642 (SOP mode 2) and mmWave radar studio?