CCS/AWR1642BOOST: In which file do I modify the chirp parameters, if I want to modify the maximum range for the IWR1642

RAMYA BODAPATI

Prodigy 90 points

Part Number: AWR1642BOOST

Tool/software: Code Composer Studio

In which document should I be changing the chirp parameters, if I wanted to modify the maximum range.

over 5 years ago

0 Cesar over 5 years ago

TI__Guru*** 148334 points

Hi,

The chirp parameters are defined in configuration profile files.

C:\ti\mmwave_sdk_03_03_00_03\packages\ti\demo\xwr16xx\mmw\profiles

Thank you

Cesar

0 RAMYA BODAPATI over 5 years ago in reply to Cesar

Prodigy 90 points

Thank you for the response.

0 RAMYA BODAPATI over 5 years ago in reply to Cesar

Prodigy 90 points

Hi Cesar,

Using the 'mmWaveSensingEstimator', I was able to find valid set of chirp parameters as per my requirement and obtained a json file when I saved that configuration. Can you please guide me how to update this into the current profile files of the radar.

Response is really appreciated.

Thanks

0 Cesar over 5 years ago in reply to RAMYA BODAPATI

TI__Guru*** 148334 points

Sorry for late reply.

Please review in the mmwave sdk documentation.

thank you

Cesar

Sensors

Sensors forum

CCS/AWR1642BOOST: In which file do I modify the chirp parameters, if I want to modify the maximum range for the IWR1642