• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 310 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1443: AWR idle current consumption

William List
Expert 6985 points
Part Number: AWR1443

Hello, I am interested in the idle current when the radar device is on but not transmitting (i.e., before or after SensorStart/SensorStop). Could this measurement be added to the Table "Average Power Consumption at Power Terminals" in the datasheet?

Bill

Average Power Consumption at Power Terminals

  • 0
    TI__Mastermind 30715 points

    Hello Bill,

    This is not something we characterize but we provide an easy way to get approximate power measurements of the device on the EVM. You can remove R118 and then measure the current across jumper P5 to get an idea of how much power the device is consuming in different use cases.

    Regards,

    Adrian