FDC1004EVM: OoP technique

Dante Uriel Ferreyra

Part Number: FDC1004EVM

Hello, Could you please tell me how to connect the Level and Reference electrodes and their Shields to the FDC1004EVM using the OoP techinique?

Thanks in advance.

over 5 years ago

0 Kristin Jones93 over 5 years ago

TI__Genius 17440 points

Hello,

For both the level and reference electrodes, please connect them like figure 6 in this document: http://www.ti.com/lit/ug/tidu736a/tidu736a.pdf

Best Regards,

0 Dante Uriel Ferreyra over 5 years ago in reply to Kristin Jones93

Prodigy 50 points

Hello,
And what pins are used in the EVM?
Thanks in advance.

0 Kristin Jones93 over 5 years ago in reply to Dante Uriel Ferreyra

TI__Genius 17440 points

Hello Dante,

The CINx and SHLDy pins are labeled in silk screen on the EVM, or you can use the schematics and layout in the FDC1004EVM User's Guide. Section 4.3 of the above document lists the suggested pin connections.

Best Regards,

Sensors

Sensors forum

FDC1004EVM: OoP technique