IWR6843AOPEVM: Vital Sign Monitoring Test failed

Schmitt Heo

Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843,

Hi there,

I bought a kit of IWR6843 for our test of Vital Sign such as Heartbeat & Breath monitoring.

and we were doing many times of test by setting all baud rate and user / data uart COM port, but nothing happend so far.

Please see below captured on my testing and give me your answer right things so that I can complete this correctly.

Thanks in advance.

Schmitt Heo

0 Akash Gondalia over 5 years ago

Hi Schmitt,

Would you be able to post both a screenshot of your console and also a picture of your powered board when this error occurs?

Cheers,

Akash

0 Akash Gondalia over 5 years ago in reply to Akash Gondalia

Hi Schmitt,

Since we haven't heard from you I'm going to close this thread. If you still have questions feel free to post here or open up a new thread!

Cheers,

Akash

0 Schmitt Heo over 5 years ago in reply to Akash Gondalia

Hi Akash,

I did paste the screen shot on the previous message, but i think it is broken.

Now i can see the IWR6843AOPEVM resolved through changing power source.

Best regards

Schmitt Heo

Sensors forum