AWR1443BOOST: awr1443

Subhankar Ghosh

Part Number: AWR1443BOOST
Other Parts Discussed in Thread: AWR1443, UNIFLASH, DCA1000EVM

Hello I have the same problem with my device. User guide link that you have provided is not working. Please provide the link.

over 5 years ago

0 Jitendra Gupta over 5 years ago

TI__Guru 69960 points

Hello Subhankar,

Could you provide the detail of your problem with the AWR1443 device?

Regards,

Jitendra

0 Subhankar Ghosh over 5 years ago in reply to Jitendra Gupta

Prodigy 40 points

Hi Jitendra,

I am trying to take adc data through CCS in AWR1443 device, I had followed this link

e2e.ti.com/.../4353.ADC-Data-Capture-SDK1.05-V1.00.pdf

but whenever I am trying to flush it with radarss and masterss bin file it is showing

"Image loading failed"

I had made the connection to operate in flushing mode(SP0 and SOP2 shorted) but it still not working.

0 Jitendra Gupta over 5 years ago in reply to Subhankar Ghosh

TI__Guru 69960 points

Hi Subhankar,

That document is based on old version SDK which supports old version of silicon not AWR1443 ES3.0

I guess you are using AWR1443 ES3.0 version which requires MetaImage binary format and single file to be loaded to flash using Uniflash.

In the latest SDK version (v2.1) Capture demo is replaced with mem_capture (C:\ti\mmwave_sdk_02_01_00_04\packages\ti\drivers\test\mem_capture). You need to use DCA1000EVM to capture raw ADC data from device for more than one frame data. Please refer below FAQ link for this purpose.

https://e2e.ti.com/support/sensors/f/1023/t/856054

Regards,

Jitendra

Sensors

Sensors forum

AWR1443BOOST: awr1443