DCA1000EVM: DCA1000EVM issue

user3434218

Intellectual 690 points

Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR6843

Hi,

We use DCA1000EVM debug DMM Driver for xIWR6843,Where can we down load soft code for Lattice'ECP5?

We need DMM driver's verilog code or your Lib,Thanks a lot!

over 5 years ago

0 Vaibhav Mahimkar over 5 years ago

TI__Mastermind 23725 points

Hello,

THE FPGA code for DCA1000 is not open and not released.

Task of the FPGA on the DCA1000 board is to capture LVDS data from the mmWave devices and save it to a file so DMM module of mmWave devices doesn't come into picture here.

In order to use the DMM module of mmWave devices please see the IWR14xx/16xx/18xx/68xx Industrial Radar Family Technical Reference Manual

Please let us know if you trying to do something specific and we can guide you in right direction.

Thank you,

Vaibhav

0 user3434218 over 5 years ago in reply to Vaibhav Mahimkar

Intellectual 690 points

Hi，

We want use low cost FPGA to replace ECP5-85,So need your DMM driver verilog code,We use DMM write IWR6843's register in our function，Thanks！

0 CHETHAN KUMAR Y.B. over 5 years ago in reply to user3434218

TI__Mastermind 25835 points

Hello user3434218,

Unfortunately, As Vaibhav mentioned FPGA code for DCA1000 is not open and not released.

You may have to refer above Technical reference manual (Chapter 19) for the DMM interface.

Thanks and regards,

CHETHAN KUMAR Y.B.

Sensors

Sensors forum

DCA1000EVM: DCA1000EVM issue