AWR1843BOOST: How can I get the elevation angle in Occupancy & Vital Signs Detection lab ?

Abdelrahman Shaker

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: AWR1843

I want to get the elevation angle in Occupancy & Vital Signs Detection lab to get range_elevation heatmap. Could you please tell me the required steps/modification in the DSS and MSS to obtain it ?

Thank you,
Abdelrahman.

over 5 years ago

0 Cesar over 5 years ago

TI__Guru*** 147854 points

Hi,

The current version of the demo uses only 2Tx and does not provide elevation information. It is designed only for 2D.

In order to provide elevation information a completely new algorithm would have to be designed.

Thank you

Cesar

0 Abdelrahman Shaker over 5 years ago in reply to Cesar

Prodigy 70 points

Alright, what about getting the elevation in Occupancy Detection Lab ?? This lab works with 3Tx for AWR1843.

Thank you for your response.

Abdelrahman.

0 Cesar over 5 years ago in reply to Abdelrahman Shaker

TI__Guru*** 147854 points

Hi,

No, the Occupancy Detection Lab is also using 2Tx.

thank you

cesar

Sensors

Sensors forum

AWR1843BOOST: How can I get the elevation angle in Occupancy & Vital Signs Detection lab ?