AWR1642BOOST: Sweep Time for AWR1642

Anum Pirkani

Expert 2005 points

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Hello,

What are the minimum and maximum sweep times that can be set for AWR1642? Can the values between this range set according to the user or are there specific values that can be used within the range of minimum and maximum sweep time?

Regards

Anum

over 5 years ago

0 Jitendra Gupta over 5 years ago

TI__Guru 69970 points

Hi Anum,

I assume you are referring to RAMP end time of chirp by sweep time then it can go max 5msec but ramp should end within the valid frequency range.

You can control this rampend time usng rlSetprofileConfig API of mmwavelink which is available in the mmWave SDK.

Regards,

Jitendra

0 Anum Pirkani over 5 years ago in reply to Jitendra Gupta

Expert 2005 points

Hi Jitendra,

By the valid frequency range, do you mean that it should end within the specified bandwidth?

Regards

Anum

0 Jitendra Gupta over 5 years ago in reply to Anum Pirkani

TI__Guru 69970 points

Anum,

Yes, your understanding is correct.

Regards,

Jitendra

Sensors

Sensors forum

AWR1642BOOST: Sweep Time for AWR1642