CCS/IWR6843ISK: can High Accuracy Lab just focus on BORESIGHT only

kevin wei

Part Number: IWR6843ISK

Tool/software: Code Composer Studio

can I measure on the high accuracy distance from the BORESIGHT direction only?

Regards,

Kevin

0 Akash Gondalia over 5 years ago

Hi Kevin,

Since the High Accuracy Lab only uses 1Tx 1Rx it does not distinguish objects in the angular domain.

You may want to look into lensing for your EVM so that the beam is concentrated down to a single point.

Regards,

0 kevin wei over 5 years ago in reply to Akash Gondalia

Hi AG,

thanks,

I would like to try adding a LENSING for narrow the beam

and close this thread

Regards,

Kevin

Sensors forum