• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 157 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDC2010METER-EVM: Data logging? Averaging?

Craig Meyers
Intellectual 730 points
Part Number: HDC2010METER-EVM
Other Parts Discussed in Thread: MSP430FR5969

At first, when I looked at the users guide, I thought this EVM was either logging humidity and temperature data or maybe averaging measurement over some period.

I thought maybe the reset button would reset logging or the average.

Can you confirm this? Then at least I would know that I would need to develop this capability.

  • 0
    TI__Mastermind 41325 points

    Hi Craig,

    There is no logging in the current firmware. The MSP430FR5969 is an FRAM equipped MCU that could retain temperature/humidity data, but it is not configured to do so on the HDC2010METER-EVM release.

    The reset button drives the reset pin of the MCU. It will cause the MCU to reboot.

    thanks,

    ren