• State TI Thinks Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 2 answers
  • Subscribers 30 subscribers
  • Views 515 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1642: AWR1642 Radar Monitoring Asynchronous Events lost

liang yu chou
Intellectual 580 points
Part Number: AWR1642

    I set 8 Radar monitoring items, Temperature, Rx Gain Phase, Rx Noise Figure, IF stage, Tx0 power, Tx1 power, Tx0 ballbreak, Tx1 ballbreak,

In MmwDemo_mssMmwaveEventCallbackFxn, I can not get the msgId (RL_RF_AE_MON_TEMPERATURE_REPORT_SB

and RL_RF_AE_MON_RX_GAIN_PHASE_REPORT) but the other I can get correctly. 

   What's wrong with this?  Should I change rlRfCalMonTimeUntConf_t.calibMonTimeUnit?

My SDK is mmwave_sdk_02_00_00_04

Thank You

                                               Liang-Yu

  • 0
    TI__Guru*** 148804 points

    Hi,

    The monitors may not be supported in the firmware version you are using.

    Please refer to the documentation of the firmware release. (Radar Interface Document in the DFP release)

    You probably should upgrade your application to use the latest firmware provided with SDK 3.3

    thank you

    Cesar

  • 0 in reply to Cesar
    Intellectual 580 points

    Hi,

         I have upgraded FW to the latest version (SDK 3.3), but MmwDemo_mssMmwaveEventCallbackFxn still does not have the Temperature and Rx Gain Phase report. How to fix this?

    Thank you

                                                          Liang - Yu

  • 0 in reply to liang yu chou
    TI__Guru 69960 points

    Hello  Liang - Yu,

    Could you refer mmwavelink test application from mmWave SDK which tests these two features.

    control\mmwavelink\test

    Regards,

    Jitendra

  • 0 in reply to Jitendra Gupta
    Intellectual 580 points

    Hi

      In mmwave Demo's dss_main.c, I add these functions ( rlRfTempMonConfig, rlRfRxGainPhMonConfig, ，

    rlRfRxNoiseMonConfig, rlRfRxIfStageMonConfig, rlRfTxPowrMonConfig, rlRfTxBallbreakMonConfig) in

    MmwDemo_dssDataPathConfigCQ. I still can't get temperature and Rx gain phase, but the other items

    can be received by MmwDemo_mssMmwaveEventCallbackFxn in mss_main.c. 

      Is it correct to add these functions in here?

    Thank You

                                                                Liang-Yu