AWR1843BOOST: Uploaded CCSDEBUG firmware the wrong way

Raivis Strogonovs

Part Number: AWR1843BOOST
Other Parts Discussed in Thread: UNIFLASH, AWR1843

Hi,

I have 2 mmWave kits, one 1642 and one 1843.

I had left uniflash by accident on 1642. And uploaded ccsdebug (the correct one) to 1843.

Now the device is not being enumerated by USB. I don't see XD110 debug, nothing.

The question is how can I reset the AWR1843 firmware to original state? And did I somehow reflash the debugger firmware?

Thank You

0 Raivis Strogonovs over 5 years ago

Nevermind I guess

For future reference here is how I recovered it

I found out that I can get into DFU mode by enabling SOP1 and SOP0

From then on I just used the xdsdfu tool to flash back the xds1100 firmware.

Which is located in my case " C:\ti\ccs1000\ccs\ccs_base\common\uscif\xds110"

Then just flash the firmware that is available there:

xdsdfu.exe -f firmware_3.0.0.11.bin

I didn't update the bootloader, I left it stock as it was.

0 Cesar over 5 years ago in reply to Raivis Strogonovs

great to hear you were able to fix this

thank you

Cesar

Sensors forum