IWR1843BOOST: CCS support

Dear Shuai:

Here is a link to get the OOB demo working for the IWR1843. If you notice in the instructions under the developer's guide it require's that you use CCS v8.3.1. I want you to get that version of CCS and go through the tutorial that I have linked and see if your device appears when you setup your target configuration. Let me know if this works.

Link: http://dev.ti.com/tirex/explore/node?node=AH1yn4Yr-VrqkN65pfhtXg__VLyFKFf__LATEST

Best regards,

Connor Desmond

Thanks for your reply. I install the newest version of CCS and I can find the people counting demo code.

But there is only demo code for 6843, no demo code for IWR1843 in people counting.

How can I get the demo code or change the code for IWR6843 to IWR1843?

And when will you  release the offical code for IWR1843? 

Dear Shuai:

The latest version of CCS is not 8.3.1. Try installing 8.3.1. Let me know if the device appears in the target configuration.

Best regards,

Connor Desmond

Sorry, I didn't express very clearly.

Now the CCS version is 10.0.0.00010, and I can find the board iwr1843 in it.

But I cannot find the source code for people counting for IWR1843. So I am wondering when will TI release it or how can I change the 68xx code to 1843.

Dear Shuai:

The IWR1843 does not have any prebuilt binaries for the People Counting Demo, so loading the project into CCS in a fashion similar to that of the other devices is not possible.

Best regards,

Connor Desmond

When will you release the 1843 people counting code? 

Or how can I test people counting on 1843?