Compiler/AWR1843BOOST: online configuration of beamsteering

Hello Paolo,

You can use rlSetDynPerChirpPhShifterCfg API (with programMode=0)  to change the phase-shift value of selected Chirp index and Tx antenna.

This API can be called during frame is running where all the new setting will be stored to temporary internal RAM. Then you need to invoke rlSetDynChirpEn API within frame active time so that new Phase value would be applied to Hardware at the end of frame-active time.

I would recommend you to refer this document for detail explanation of this API.

http://downloads.ti.com/ra-processors/esd/MMWAVE-DFP/latest/exports/mmwave_dfp_user_guide.pdf

Regards,

Jitendra

thank you really mutch for your quicke response.

I have two additional questions.

1. Where can I download the API.

2. Is it possible to modify the beamsteering demo http://dev.ti.com/tirex/explore/node?node=AFM6P3JE2lPqGATZLQmUrw__AocYeEd__LATEST 

so that i can use the API to set the configuration parameters ?

Best Regards

Paolo

thank you really mutch for your quicke response.

I have two additional questions.

1. Where can I download the API.

2. Is it possible to modify the beamsteering demo http://dev.ti.com/tirex/explore/node?node=AFM6P3JE2lPqGATZLQmUrw__AocYeEd__LATEST 

so that i can use the API to set the configuration parameters ?

Best Regards

Paolo