IWR6843AOPEVM: Does IWR6843AoP ES2.0 need to do measurement and compensation

Allen35065

Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843AOP, IWR6843ISK

Hi expert,

Customer already made their own board according to TI EVM board. We know on IWR6843ISK board we need to do Range Bias and Rx Channel Gain/Offset Measurement and Compensation. Is it needed on IWR6843AoP? Is there any other calibration we need to do before use this device?

Thank you.

Allen

over 5 years ago

0 Charles Oladimeji over 5 years ago

TI__Mastermind 33805 points

Hi,

I am looking into this and will get back to you.

Charles O

0 Charles Oladimeji over 5 years ago in reply to Charles Oladimeji

TI__Mastermind 33805 points

Hi,

Calibration is still needed for the AOP similar to the other non AOP devices.

Regards,

Charles O

Sensors

Sensors forum

IWR6843AOPEVM: Does IWR6843AoP ES2.0 need to do measurement and compensation