IWR1642BOOST: People counting using iwr1642

Srikrishna Iyer

Prodigy 50 points

Part Number: IWR1642BOOST
Other Parts Discussed in Thread: IWR1642

Is there a out-of-the-box demo for people counting using iwr1642 'cause I can't seem to find it.

over 5 years ago

0 Justin Curewitz over 5 years ago

TI__Mastermind 28055 points

Hi Srikrishna,

You will need to download an older version of the industrial toolbox. Please try version 3.6.2 (then use lab0011)

Regards,
Justin

0 Srikrishna Iyer over 5 years ago in reply to Justin Curewitz

Prodigy 50 points

Thanks Justin. Unfortunately, a few seconds after flashing my .bin demo onto my EVM, the EVM has stopped working. It doesn’t seem to switch on. I suspect that the sensor board is faulty. I am using a 5V 4A adapter (in accordance with voltage rating in datasheet). May I know if it is possible to get a replacement and if so who may I contact regarding the same?

0 Justin Curewitz over 5 years ago in reply to Srikrishna Iyer

TI__Mastermind 28055 points

Hi Srikrishna,

Typically we recommend 5V 3A - it is possible you may need to step down to a lower power supply.

We don't handle returns on E2E.

Regards,

Justin

Sensors

Sensors forum

IWR1642BOOST: People counting using iwr1642