CCS/AWR6843ISK: AWR6843ISK usage for Vital Signs Driver use case

Alireza Malek

Part Number: AWR6843ISK
Other Parts Discussed in Thread: UNIFLASH, IWR6843ISK, MMWAVEICBOOST, AWR6843

Tool/software: Code Composer Studio

dear Sir or Madam,

I can use IWR6843ISK Antenna Module or IWR6843ISK-ODS Antenna Module for Vital Signs Driver Demo. Can i use AWR6843ISK EVM for this case? I have problem with UNIFlash program. I can't find any AWR6843ISK EVM, if i search this name, i can only find AWR6843 and not AWR6843ISK.

Thank you very much

best regards

Alireza

over 5 years ago

0 Jitendra Gupta over 5 years ago

TI__Guru 69960 points

Hello Alireza,

Yes you can use AWR6843ISK for this application.

Hardware interfaces for AWR6843ISK and IWR6843ISK are similar so you can select IWR6843ISK in uniflash to flash the binary. But you need to connect AWR6843ISK with MMWAVEICBOOST to do that as you were doing earlier with IWR board.

Regards,

Jitendra

0 Alireza Malek over 5 years ago in reply to Jitendra Gupta

Prodigy 180 points

Hi Jitendra,

Thank you very much for your answer. can I realize Vital Signs Driver Demo without MMWAVEICBOOST and make it work only with AWR6843ISK?

Can i select Awr6843 Uniflash? Does it work AWR6843ISK EVM?

best regards

Alireza

0 Jitendra Gupta over 5 years ago in reply to Alireza Malek

TI__Guru 69960 points

To flash using Uniflash you need to use MMWAVEICBOOST whereas for executing the image it may not required.

You can select AWR6843 option in uniflash.

Regards,

Jitendra

Sensors

Sensors forum

CCS/AWR6843ISK: AWR6843ISK usage for Vital Signs Driver use case