IWR6843AOPEVM: IWR6843AOP ES2.0 EVM not able to capture raw data thru DCA1000EVM

ken hsieh

Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843AOP

Hi,

We have purchased 2pcs of IWR6843AOP "ES2.0" EVM, trying to capture raw data by using both mmwave studio 02.01.00.00 and 02.01.01.00 thru DCA1000 EVM, but failed with below message. For clarification,we are able to capture raw data using IWR6843AOP "ES1.0" EVM with above tools. Please advise how to fix the raw data capture issue with AOP ES2.0 EVM, thanks!

Regards,

Ken Hsieh

over 4 years ago

0 zigang Yang over 4 years ago

TI__Mastermind 36515 points

HI,

The same procedure should work for AOP ES2. The only difference is the loading BSS/MSS binary is different for these two devices. But it seems that you have not gone that far yet. Can you check you are seeing 6 USB port in control panel? And also send me a picture of your setup?

Best,

Zigang

0 zigang Yang over 4 years ago in reply to zigang Yang

TI__Mastermind 36515 points

HI,

Since I am not getting any update from you for a while, I am closing this thread for now.

Best,

Zigang

Sensors

Sensors forum

IWR6843AOPEVM: IWR6843AOP ES2.0 EVM not able to capture raw data thru DCA1000EVM