Compiler/IWR6843ISK: which pin is SCL and SDA in MMWAVEICBOOST carried board?

Tom Li2

Part Number: IWR6843ISK
Other Parts Discussed in Thread: MMWAVEICBOOST, IWR6843

Tool/software: TI C/C++ Compiler

I test I2C function with C:\ti\mmwave_sdk_03_03_00_03\packages\ti\drivers\i2c\test\xwr68xx, I want to see SCL and SDA waveform with oscilloscope , but can not get anything, do I connec the pin of mmwaveIcboost carried board correctly?

over 4 years ago

0 Charles Oladimeji over 4 years ago

TI__Mastermind 33805 points

Hi,

how are you connecting the MMWAVEICBOOST to the scope?

Regards,

Charles O

0 Tom Li2 over 4 years ago in reply to Charles Oladimeji

Intellectual 315 points

0 Tom Li2 over 4 years ago in reply to Tom Li2

Intellectual 315 points

Is it right?

0 Tom Li2 over 4 years ago in reply to Tom Li2

Intellectual 315 points

I set "testSelection" from 0 to I2C_TEST_SCAN_MODE in Master.c, then get the follow message， but I test PIN J5 -17, J5-19 of mmWaveICboost carried board