• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 290 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

WEBENCH® Tools/AWR1642BOOST: How to use AWR1642BOOST and mmWave-Devpack ?

Arnaud DOME
Prodigy 50 points
Part Number: AWR1642BOOST


Tool/software: WEBENCH® Design Tools

Hello, 

I bought a mmWave-Devpack with my AWR1642BOOST. I notice in mmWave-Devpack that there is an other board TSW1400.

Is TSW1400 needed to use mmWave-Devpack ? What can we do with mmWave-Devpack and AWR1642BOOST alone?

  • 0
    TI__Guru**** 150224 points

    HI,

    mmWave Devpack is an older board that is no longer available from TI.

    Here was the use of the board:

    This board was used to connect the AWR1642BOOST to mmWave Studio. This allowed to configure the BOOST EVM through mmWave Studio. However this allowed only configuration without data collection. In the past the TSW1400 was required in addition to the DevPack to capture raw data.

    Today, we have replaced the Devpack+TSW1400 by the DCA1000 EVM which allows to configure the BOOST evm and also to capture the raw data.

    www.ti.com/.../DCA1000EVM

    Thank you

    Cesar