HDC2080: HDC2080 Temperature sensor validation with quectel sc600t

Suraj Prajapati

Part Number: HDC2080

Hello there,

We are using HDC2080 Temperature sensor interfacing with Quectel SC600T module.

We have asked Quectel Support Team if it's going to work with SC600T or not but they never debugged this sensor before. In the

response they told to ask you that can you provide a recommended driver so that they can debug it in their code and validate.

Waiting for your response.

Regards,

Suraj

over 5 years ago

0 Brandon Fisher94 over 5 years ago

TI__Mastermind 28075 points

Hi Suraj,

Thank you for your post.

We do not have drivers specifically for the HDC2080 and any Quectel Modules. It looks like this module is intended to run Android 9.0, which should have an I2C driver that you can use for sensor control.

You could use our SysConfig tool to generate generic MCU code for the HDC2080, and then insert the required functions into the mcu.c file that the tool generates. This code was not designed for Android 9.0 but it would give you a good starting point for controlling the HDC2080.

Best Regards,
Brandon Fisher

Sensors

Sensors forum

HDC2080: HDC2080 Temperature sensor validation with quectel sc600t