IWR6843AOPEVM: IWR6843AOP ES1.0 DCA1000EVM

user5115653

Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843AOP, MMWAVEICBOOST, DCA1000EVM,

Hi everybody!

Do work together IWR6843AOP ES1.0 on the carrier board MMWAVEICBOOST with DCA1000EVM? What is the needed SW? And what the needed version of this SW?

Thank you in advance!!

Best regards!

0 Vaibhav Mahimkar over 5 years ago

Hello

On AOP EVMs to load and run the lab/demo mmWaveiCboost is not required.

Please see the instructions in the Tirex Lab's User's guide.

Thank you,

Vaibhav

0 user5115653 over 5 years ago in reply to Vaibhav Mahimkar

Hello Vaibhav,

thank you again very much for your message!

My questions is if the IWR6843AOP ES1.0 and DCA1000EVM work together.

Thank you very much,

Enrique

0 Vaibhav Mahimkar over 5 years ago in reply to user5115653

Hello

Below apllies to IWR6843AOPEVM ES1 and ES2 Evms

For loading and running demo (ex. TIrex demo) - mmWaveICBOOST is not needed

For Raw Data collection (via LVDS port of IWR6843AOP Device) - mmWaveICBOOST and DCA1000 Hardware needed.

Hope this helps.

Regards

Vaibhav

Sensors forum