AWR2243: AWR2243P - SPI_CS_1 signal

Tomotaroh Kohro

Genius 17285 points

Part Number: AWR2243

Hello Support team.

The data sheet does not describe the timing relationship between SPI_CS_1 and other SPI signals.

What are the timing rules for setup/hold, etc.?

Also, please tell me about the timing with CS.

KORO

over 5 years ago

0 Cesar over 5 years ago

TI__Guru*** 149134 points

Hi,

Here is some information

Regarding the setup/hold times, our HW team will review your questions and get back to you

thank you
Cesar

0 Vivek Dham over 5 years ago in reply to Cesar

TI__Guru 58035 points

Hello Kohro,

The CS requirements are mentioned in the section 5.2.9.4 of the datasheet. In terms of setup/hold time for CS, its the same as that of the data, as mentioned in the table 5-10 of the datasheet.

Regards,

Vivek

0 Tomotaroh Kohro over 5 years ago in reply to Vivek Dham

TI__Genius 17285 points

Hello Vivek-san

Thanks a lot.

Br
KORO

Sensors

Sensors forum

AWR2243: AWR2243P - SPI_CS_1 signal