Other Parts Discussed in Thread: AWR1642BOOST
Hello Ti Team,
I connected the DCA1000 evm with Awr1642boost module.
I have also installed pre-requsit software.
And have completed the procedure according to this video: https://training.ti.com/dca1000-training-video
everything was good, but after changing the static ip address of local area connection (in my case ethernet), when i am trying to run the "mmWaveStudio.exe" from path: \mmwave_studio_01_00_00_00\mmWaveStudio\RunTime i am getting the error as follows:
Please help me to solve this issue.
Kind Regards,
Aditi Karande
