AWR1243BOOST: AWR1243 BOOST TESTING SUPPORT

Harish achar

Part Number: AWR1243BOOST
Other Parts Discussed in Thread: UNIFLASH, AWR1243, TM4C1294NCPDT

Hi there,

I have AWR1243booster, there are too many higher version AWRs, too many confusion which supports what software.

Using UniFlash I did upload xwr12xx_metaImage.bin to the booster board.

Now I don't know what to do. How can I test its working? There are no visual studio for this board and I don't want to buy any other addon boards. Whatever I have to develop using this board only.

How can I do that? Need support.

Regards,

Harish

over 5 years ago

0 Ishita Kochar over 5 years ago

TI__Mastermind 31680 points

Hello Harish,

AWR1243 is a front end only device and hence you need to connect this with an external host (like TDAx, FPGA, DCA1000, or any other processor) for evaluation purposes.

Let us know if you need any further information.

Regards,

Ishita

0 Harish achar over 5 years ago in reply to Ishita Kochar

Prodigy 80 points

Hi Ishita,

Thanks for your reply. I have AWR1243 booster board and the board has tm4c1294ncpdt ARM microcontroller, then what is the use of this controller in the board, If I have to use other processor? Please suggest.

Regards,

Harish

0 Ishita Kochar over 5 years ago in reply to Harish achar

TI__Mastermind 31680 points

Hello Harish,

On board TIVA MCU is used for JTAG and UART-to-USB emulator on all the BOOST EVMs.

AWR1243 BOOST sends out raw ADC data over the LVDS/CSI2 interface and you would need an external host to capture that.

Regards,

Ishita

Sensors

Sensors forum

AWR1243BOOST: AWR1243 BOOST TESTING SUPPORT