• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 345 views
  • Users 0 members are here
Support feedback
Options
Options

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR1243: Can AWR1243 send fixed data through LVDS?

FENG TAO
Intellectual 380 points
Part Number: AWR1243

Hi，

I use FPGA to receive the data sent by AWR1243 through LVDS, and I want to confirm the accuracy of the data. So this requires AWR1243 to send fixed, known data. Is there any way to achieve it?

Thanks!

  • 0
    TI__Mastermind 31680 points

    Hello,

    Did you try finding some similar threads regarding this on our forum?

    We encourage you to use google site search as follows: "site e2e.ti.com <Your query>"

    Here is an example :"site e2e.ti.com awr test pattern"

    Below is one thread produced for your reference :

    AWR1243: Test Pattern Generator Support. - Sensors forum - Sensors - TI E2E support forums

    e2e.ti.com
    Part Number: AWR1243 Other Parts Discussed in Thread: MMWAVE-DFP Is there a way to place the AWR1243 into a known output test pattern? Or another method for validating

    Alternatively, you could also search for "AWR DEV TESTPATTERN GEN SET SB" API in the ICD to understand the test pattern generation is mmWave studio. 

    The "DataConfig" tab in studio has the test pattern programmability. 

    Regards,

    Ishita