CCS/AWR1843BOOST: LABS Implementation

ahmad arshad

Part Number: AWR1843BOOST

Tool/software: Code Composer Studio

How can i implement Gesture control and MRR without DCA1000 or 1400 . Is it possible to operate these labs without capture card.

0 Cesar over 5 years ago

Hi,

Yes, these labs do not require a Capture card as mentioned in the release notes.

Capture card would be required only for raw data collection

thank you

Cesar

0 ahmad arshad over 5 years ago in reply to Cesar

Hi, thank you.

But which software i need to use for uploading all files of any lab, and get the output of the said project?

0 Cesar over 5 years ago in reply to ahmad arshad

Each lab includes a user guide that explains how to flash and run the demo

For example, for multi gesture demo please look at the following:

labs\lab0009_multi-gesture-16xx\docs\multi-gesture_16xx_user_guide.pdf

thank you

Cesar

0 ahmad arshad over 5 years ago in reply to Cesar

I am unable to change range etc in MRR lab on 1843, which M file i need to edit for range and GUI title edition?

0 ahmad arshad over 5 years ago in reply to ahmad arshad

I also do not want to utilize parking assist and USSR in my UI, so from where can i eliminate these two utilities buttons available in GUI.

I want to change its max range and max velocity , how can i update that into GUI?

0 Cesar over 5 years ago

Please look at “srr_ti_design_visualization.m”. Please step in matlab through the code

Thank you

Cesar

0 ahmad arshad over 5 years ago in reply to Cesar

can you please explain, i could not get your point? Will srr_ti-design___ satisfy my both questions?

0 Cesar over 5 years ago in reply to ahmad arshad

Hi,

If you want to modify the “srr_ti_design_visualization.m” you will be able to update the GUI.

However I am clear what you are trying to achieve. What is the objective of your project?

thank you

Cesar

Sensors forum