• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 795 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMWCAS-RF-EVM: Imaging radar chirp configuration

Sameera Palipana
Prodigy 50 points
Part Number: MMWCAS-RF-EVM

Hi,

I'm interested in the chirp configuration for the setup in below figure for the cascade radar. I found this in the article https://e2e.ti.com/blogs_/b/behind_the_wheel/archive/2019/07/25/ti-mmwave-technology-for-car-interior-sensing

Is it possible to get it's configuration somehow?

Thanks!

https://e2e.ti.com/cfs-file/__key/communityserver-blogs-components-weblogfiles/00-00-00-08-94/Imaging_2D00_radar_2D00_interior_2D00_sensing.jpg

  • 0
    TI__Guru*** 149044 points

    Hi,

    Please note that the point cloud shown in the picture was not obtained by the MMWCAS-RF-EVM but by an imaging antenna from a third party.

    Chirp configuration is probably a standard chirp configuration. There is probably also an overlay of point cloud for 5-10 frames

    thank you

    Cesar