DRV8432： Appearance changes?

user4971793

Prodigy 30 points

Part Number: DRV8432

I want to ask about the appearance of drv8432dkdr.

This is a product I bought before. We can see that there are two big circles on the drv8432.

And this is my new drv8432.There's nothing on it.

My question is: Is this a change in the packaging plant？

over 5 years ago

0 Ryan Kehr over 5 years ago

TI__Guru 55615 points

Hello,

Can you please try to reattach the images using the "paperclip" icon on the toolbar above? I am not able to see them for some reason.

0 user4971793 over 5 years ago in reply to Ryan Kehr

Prodigy 30 points

Tks for your reply.

i uploaded the photo in post.

0 Ryan Kehr over 5 years ago in reply to user4971793

TI__Guru 55615 points

Thank you, I can see the images now.

I will need to check with our manufacturing team, but it would also help a lot to send images of the top side for each device. I can then check the lot trace codes and verify.

0 Ryan Kehr over 5 years ago in reply to Ryan Kehr

TI__Guru 55615 points

Just following up on this. Were you able to get images from the top side of the device?

0 user4971793 over 5 years ago in reply to Ryan Kehr

Prodigy 30 points

I will try.

Due to workflow is no easy to let QC take a photo.

But in order to solve the problem, I will try.

0 Ryan Kehr over 5 years ago in reply to user4971793

TI__Guru 55615 points

Hello!

Even if you can get someone to send you the letter/number combinations off the top. Without this, I can not check manufacturing flow.

0 Ryan Kehr over 4 years ago in reply to Ryan Kehr

TI__Guru 55615 points

Hi!

Checking in again on this. Please let me know if you can get markings off the top of each IC.

0 Ryan Kehr over 4 years ago in reply to Ryan Kehr

TI__Guru 55615 points

Hello,

I am going to go ahead and close this post. If you do get the part markings and still have this concern, please just re-open the post at a later date.

Thank you!

Sensors

Sensors forum

DRV8432： Appearance changes?