The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 443 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843AOPEVM: Giving signal for time synchronization

Kazu Hira
Intellectual 680 points
Part Number: IWR6843AOPEVM
Other Parts Discussed in Thread: IWR6843AOP

Hi supports,

I want to simultaneously run multiple radars(IWR6843AOP).
Here, 'simultaneously' doesn't mean time synchronization in phase but in frame.

The operation by HW trigger have worked well on my side.
Next I want this to give the SYNC_OUT signal.
I tried to connect SYNC_OUT pin via carrier board but there is no output signal.

Would you tell me what I should do for giving SYNC_OUT signal.
Do I have to modify program? (I have used OOB demo now.)

Regards,
Kazuki