MMWCAS-RF-EVM: MMWCAS-RF-EVM tutorial with mmWave Studio or HSDC

Hi,

It seems that you want to record raw data with the mmwave cascading kit.

You are correct, the mmwave_studio_cascade_user_guide.pdf is the document that provides the steps to capture raw data.

Please let us know which step is not clear so we can assist you

thank you
cesar

Hello Jet,

1. Yes, you are right. Currently, we have mmWave_studio_cascade_user_guide.pdf to help users get a kick start on cascade evaluation. The user guide is a well comprehensive document for our new users to understand the board functionality with mmWave studio.

2. Furthermore, Our FAQ page also lists most of the documents users might need for reference. Please see below:

3. We also provide various example scripts with the mmWave studio package for cascade evaluation, details of which can be found in the user guide.

The scripts can be found here: <installation_directory>\ti\mmwave_studio_03_00_00_14\mmWaveStudio\Scripts\Cascade

4. Lastly, if you have any other concern, you're most welcome to reach out to us by posting a query on this forum or read some previously answered threads asked by fellow users.

Thankyou for using mmWave devices! Happy Learning!

Regards,

Ishita

hi cesar and ishita

thanks for your kind reply. I find the document is very detail and helpful.

Btw, can the mmW cascade & DSP board work in a standalone mode, where it can be disconnect from the laptop for a peroid of time and continue connecting data itself. As we plan to place it on a moving robot.

Best.

Jet

hi Cesar,

A quick question for the power supply. Is 12V-5A is a must, will 12V-3A will do?

As we plan to place the mmW board on a robot, and make it  work with portable battery. While most battery support 12V-3A, and 5A is pretty hard to find and was told it is bit dangerous in portable battery.

Best.

Jet.

Hello Jet,

Yes, typically we recommend using a 12V-5A power supply, but the minimum requirement is atleast a 3A rating. 

Regards,

Ishita