IWR1642: SBL by can

user5216342

Part Number: IWR1642

I added the code according to the Suggestions in the TI document. After modifying the errors in the code, the errors in the picture appeared in the compilation process. Where should these errors be modified?
We are making industrial radar, thank you!

over 4 years ago

0 Vaibhav Mahimkar over 4 years ago

TI__Mastermind 23725 points

Hello

Can you please confirm that you are able to compile the OOB demo for the device and able to create and use the image from that.

Would like to make sire that the basic compile setup works at your end.

Thank you,

Vaibhav

0 user5216342 over 4 years ago in reply to Vaibhav Mahimkar

Intellectual 620 points

I have solved this problem and transmitted the new program through the CAN analyzer following the steps on the documentation.
However, there is a new problem. You need to hit a space on the keyboard before transmitting with CAN. However, this space character seems to be passed to the radar through a serial port, but our client wants to transmit with CAN completely.
Can this step be transmitted via CAN?
If so, how does the code change?
thank you

0 Yogesh Siraswar over 4 years ago in reply to user5216342

TI__Mastermind 20835 points

Hi,

Yes, you can completely bypass UART and use CANFD. But we do not have reference code for the same. You may need to write and debug.

Thanks

Yogesh

Sensors

Sensors forum

IWR1642: SBL by can