LDC1614EVM: API of the SensIng Solutions EVM GUI Tool

Danilo A.

Part Number: LDC1614EVM
Other Parts Discussed in Thread: ENERGIA

Hi Team,

A customer wants to automate the control of the SensIng Solutions EVM GUI Tool. He wants to know if we can provide an open source API.

Regards,

Danilo

over 5 years ago

0 Justin Beigel over 5 years ago

TI__Mastermind 18545 points

Hello Danilo,

Unfortunately, we do not have any API or example code we can supply to the customer for this.

Best Regards,

0 Danilo A. over 5 years ago in reply to Justin Beigel

TI__Mastermind 34550 points

Hi Justin,

Thank you for your response. Does the GUI Composer tool supports LDC1614EVM since it has MSP430 MCU in the board? I understand that all MCU are supported as stated in the link below.

https://software-dl.ti.com/ccs/esd/documents/ti_cloud_agent.html#requirements

Regards,

Danilo

0 Justin Beigel over 5 years ago in reply to Danilo A.

TI__Mastermind 18545 points

Hello Danilo,

There might be a way to make the EVM work with GUI Composer but after discussing with some colleagues, it will probably be easier to use Energia for this. It is similar to Arduino and has support for many of the MSP devices already. You should be able to use the I2C communication from this to automate control of the EVM.

Best Regards,

0 Danilo A. over 5 years ago in reply to Justin Beigel

TI__Mastermind 34550 points

Hi Justin,

Thank you for suggesting Energia as an alternative to GUI Composer. The customer wants to know if we have library support for the EVM control.

Regards,

Danilo

0 Justin Beigel over 5 years ago in reply to Danilo A.

TI__Mastermind 18545 points

Hello Danilo,

Unfortunately we do not have any library support for the EVM. Any development will need to be done by the customer.

Best Regards,

Sensors

Sensors forum

LDC1614EVM: API of the SensIng Solutions EVM GUI Tool