• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 172 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MMWCAS-RF-EVM: Design

Aanund Storhaug
Intellectual 260 points
Part Number: MMWCAS-RF-EVM

Hi,

I like to know more about the background for the selected design of MMWCAS-RF-EVM? I think of the selection of positions for transmitters and receivers belonging to different devices? In azimuth it is a considerably number of virtual antenna positions overlapping each other. Why so? Else it is an interesting and challenging device!

Regards

Aanund

  • 0
    TI__Guru*** 147964 points

    Hi,

    The MMWCAS-RF_EVM is described in the following TI Design UG:

    The board was designed to meet the specifications documented in Table 1.

    The overlapped antennae are used for Vmax computation. A patent application is in process for this method. After it is completed more information can be shared on this forum

    thank you

    Cesar