• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 370 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843AOP: Why can't work burst mode for people counting using IWR6843AOP

Cruijff
Expert 2760 points
Part Number: IWR6843AOP

Hi community member,

My customer would like to test changing dfeDataOutputMode to burst mode(=3) like as attached file.

AOP_6m_burst.cfg

But it is not work in mmwave_people_counting_demo.exe.

Do you know that reason?

Please let us know how to configure for burst mode.

Best regards.
Cruijff

  • 0
    TI__Mastermind 30405 points

    Hi Cruijff,

    Burst mode dfe output (i.e. dfeDataOutputMode  = 3) is used for advanced subframe config, which also requires software support. The people counting software chain does not support advanced subframe configuration so this mode will not work with this demo.

    Regards

    -Nitin